Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Sub Gould 2800S Setups (1 year) CAL VER /5500
DATE:                  03-Sep-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.6 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       6
NUMBER OF LINES:       79
CONFIGURATION:         Fluke 5500A
=============================================================================
#
# Compatibility:
#   5500/CAL 4.0 or MET/CAL 4.0 or later.
#
# Subprocedures:
#   none
#
# Required Files:
#   None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5500A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  DISP         {Procedure not formally tested with UUT.}
  1.001  DISP         {See procedure README file.}
  1.002  ASK-   R     N              P                            F        V
  1.003  ASK+                                          X
  1.004  HEAD         SPAN: [MEM2]
  1.005  RSLT         =SPAN: [MEM2]
  1.006  DISP         Connect the 5500A to the UUT as follows:
  1.006  DISP         [32] 5500A NORMAL HI to UUT [MEM2] POS. INPUT
  1.006  DISP         [32] 5500A NORMAL LO to UUT [MEM2] NEG. INPUT
  1.007  5500         0V                                                S  2W
  1.008  DISP         Set the CHART SPEED to 5mm/s.
  1.009  DISP
  1.009  DISP         Using the POSITION control, position the pen
  1.009  DISP         on the channel zero line on the chart.
  1.010  MESS         Slew output for full scale deflection.
  1.010  MESS
  1.011  5500         5.0V           0.1%                                  2W
  2.001  MESS

  2.002  HEAD         LIMIT: [MEM2]
  2.003  RSLT         =LIMIT: [MEM2]
  2.004  5500         0V                                                S  2W
  2.005  DISP         Turn the POSITION control fully CCW.
  2.006  RSLT         =1.5 div +/-.25mm beyond LEFT channel margin
  2.007  EVAL   Is [MEM2] 1.5 div +/-.25mm beyond the LEFT channel margin?
  3.001  5500         0V                                                S  2W
  3.002  DISP         Turn the POSITION control fully CW.
  3.003  RSLT         =1.5 div +/-.25mm beyond RIGHT channel margin
  3.004  EVAL   Is [MEM2] 1.5 div +/-.25mm beyond the RIGHT channel margin?

  4.001  HEAD         DAMPING: [MEM2]
  4.002  HEAD         =DAMPING: [MEM2]
  4.003  5500         0V                                                S  2W
  4.004  DISP         Adjust the POSITION control to set the pen to center
  4.004  DISP         scale (50%).
  4.005  5500         4Vpp                         1H             SQ    S  2W
  4.006  RSLT         =overshoot <.01%
  4.007  EVAL   Is [MEM2] overshoot <.01%?

  5.001  HEAD         FREQUENCY RESPONSE: [MEM2]
  5.002  DISP         Set the CHART SPEED to 25mm/s.
  5.003  5500         1.8V                         5H             SI    S  2W
  5.004  PORT         [D2500]
  5.005  5500         1.8V                         50H            SI    S  2W
  5.006  RSLT         =amplitude within .1mm of previous 5 Hz amp.
  5.007  EVAL   Is [MEM2] amplitude within .1mm of previous 5 Hz amplitude?
  6.001  DISP         Set the CHART SPEED to STOP.

  6.002  RSLT         =
  6.003  END